Electrical Safety

• This list is intended to supplement classroom instruction. To the best of my knowledge these instructions are correct but are by no means exhaustive Using these instructions without additional clarification and instruction may be dangerous.

• Do not complete labs which involve electricity unless under the direct supervision of your instructor in their presence.
• Do not connect power until the circuit has been checked by the instructor.
• In general students should not use power sources above 40 V. This includes mains!
• Be aware of the circuit you are using. It is very easy to "step up" the voltage in circuits to a dangerous level even if you are using a save power supply voltage. Have your (method) circuits checked before connection.
• If you detect anything too hot or smell "something burning" disconnect the power.
• Do not "experiment" beyond what has been approved and checked.

IB09 Physics Home