1. Wear Personal Protective Equipment (PPE) such as safety glasses,
safety goggles, face shields, gloves and proper clothing as appropriate.
2. No loose clothing, long hair or jewelry is allowed in the shop.
3. Do not operate the belt and disc sander without the instructor’s
permission.
4. Be aware of the position of the on/off switches and emergency STOP
button.
5. Remove all the sawdust around the belt/disc sander.
6. Do not operate if the abrasive paper is loose or torn.
7. Ensure that power is off when changing the belt.
8. Sand only on the rotating-down side surface of the disc-sander.
9. Sand only on dry wood.
10. The stock must be positioned against the table at all times.
11. Belt sander roll end and side guards should be properly adjusted
and in good condition.
12. Do not apply excessive force toward the belt or disc. Let the machine
do the work.